Sydney · Melbourne · Regional NSW & VICMon–Fri, 7:30am–5pm
A Drain Man robotic cutting truck set up at a street job

Robotic cutting · Councils, water authorities and asset owners

Robotic cutting that reopens pipes

Relined a main and sealed over the side connections? Roots or set concrete choking a line? Our robotic cutters fix it from inside the pipe, with no trench.

  • Every cut checked on the robot’s camera
  • 80+ staff, trained in house
  • Licensed and ISO accredited

4.8 from 575+ reviews on ProductReview.com.au

Operators who show you the footage

Our reviews come from homeowners, but they show how our operators work on any job: on time, clear and tidy.

ProductReview

“Tom assessed the situation and his solution provided the outcome needed - drains full of tree roots cleared and cleaned!”

Bridget, VICTree roots in drains
ProductReview

“Kane was excellent this morning, provided a long term solution with lots of suggestions”

MattDrain repair
ProductReview

“Kane arrived on time , showed us the blockage on the camera and then promptly cleared it ,cleaned up all done ,highly recommended”

Kieran D.Blocked drain

Jobs that call for a robot, not a trench

These are the calls we get from network managers. Here is what the cutter does about each one.

  • A new liner has sealed over every side connection on the line.

    Our operators plot each one to the millimetre, then the robot cuts it open.

  • Tree roots in the main are too big to clear another way.

    A special cutting head cuts them back and gets the pipe ready for repair.

  • Concrete slurry from building work has set inside the pipe.

    We cut it into small pieces and remove it, often with no digging.

  • Tuberculation and crusty deposits have narrowed the pipe.

    The robot breaks up hard build up, and even steel reinforcing.

  • Roots keep coming back through the same gap.

    We pair the cut with a liner or point repair that seals the gap.

  • You don’t want a separate camera unit on site just to watch the cutter.

    The cutter has its own built in CCTV, so no second unit is needed.

Robotic cutters that reopen connections after relining, cut out tree roots and remove concrete from pipes, all without digging.

Cutting out tree roots

Tree roots, both fine roots and tap roots, can get into a drain or sewer. They can break and block it. When roots are too big to clear another way, our robot uses a special cutting head to cut them back.

This gets the pipe ready for repair. It saves time, money and disruption. Once the roots are out, we can clean the pipe and survey it with a camera. Then we check the damage before we fit a liner or patch.

Concrete and other blockages

During building work, slurry, cement and concrete can get into drains and pipes. We can remove concrete and hard build up such as tuberculation, steel reinforcing and crusty deposits.

Our robotic cutters break up foreign objects into small pieces so we can remove them. There’s no costly digging. The site is safer and smaller.

A Drain Man robotic cutting truck parked in a car park

Why roots need more than a cut

Roots find the smallest crack or gap in a pipe. Once inside, they thicken and force the gap wider. Cutting them out clears the line, but on its own it only lasts a while. The roots will grow back through the same gap.

So we pair root cutting with a lasting fix. A full liner or a point repair seals the gap the roots came through. Read how tree roots get into drains.

How a cutter reopens a relined main

Most of our cutting follows a reline. Here is how that job runs, start to finish.

  1. A CCTV crawler camera inside a large pipe

    Step 1: We film and clean the line first

    Every job starts with a camera survey and a clean, so we know where each side connection sits. The footage also shows whether cutting will do the job, or whether a badly broken or concrete filled section needs replacing. You get a clear answer before we start.

    Survey and clean

    We film the pipe and clean it, so we know where every side connection sits.

    When cutting isn’t enough

    Most concrete and hard build up can be cut out. But a pipe that is fully blocked with a large amount of concrete may need that section replaced. The same applies to a pipe that is badly broken.

    A camera survey shows us which case we’re dealing with before we start. You get a clear answer and the footage to back it up.

  2. An inversion drum feeding a liner into an access chamber

    Step 2: The liner goes in and covers the openings

    The new liner goes into the old pipe and cures in place. While it hardens, it covers every opening where a side pipe joins, so homes and buildings can’t drain into it yet. That’s why we film the line first and know where each one sits.

    Reline

    The new liner goes in and cures. While it hardens, it covers the openings where side pipes join.

    The right cutter for any job

    We invest in the best robotic cutting gear on the market, so we have cutters for any job. Our trained operators cut pipes and repair them every day. Our robotic cutters are very flexible, which saves you time and money.

    We use robotic cutting alongside other no dig methods, like trenchless pipe relining and point repairs. Together they give a complete repair of your existing pipes.

  3. Illustrative: gloved hands fit a cutting head to a robotic cutter at the back of the truck

    Step 3: Plotted to the millimetre, then cut

    Our trained operators mark the position of each connection down to the millimetre. Then the robot cuts each opening clean through the liner, working from inside the pipe. There’s no trench, and the work area on the surface stays small.

    Plot

    Our operators mark the position of each connection to the millimetre.

    Cut

    The robot cuts each opening clean through the liner.

    Precision cutting

    When we reline a pipe, our trained operators mark where each side connection or junction joins, down to the millimetre. Then a robotic cutter opens each connection fully. That brings back the flow from homes and buildings.

  4. Illustrative: the robot’s camera view of a side connection cut fully open through a new liner

    Step 4: The robot’s camera checks every opening

    The robot’s own camera shows every cut, so the operator can confirm each connection is fully open. Flow from homes and buildings comes back. Because the CCTV is built into the cutter, there’s no need for a second camera unit on site.

    “Showed us the live video and gave us a quote and explained what to do next. Very happy with the outcome.”

    Viv, on ProductReview

    Check

    The robot’s own camera shows every cut, so the operator can confirm each connection is fully open.

    Key benefits

    • A safer way to work, with none of the risks of digging a trench.
    • A more sustainable choice, with a smaller carbon footprint on site.
    • A built in CCTV system, so there’s no need for a second camera unit on site.
    • A flexible fix. We have a wide range of cutting heads and tools to suit any job.

Cutting jobs come with these

  • A camera survey firstSo you know if cutting will do the job.
  • Connections plotted to the mmSo every opening is cut in the right spot.
  • Built in CCTVSo each cut is checked as it’s made.
  • The right cutting headSo roots, concrete and liner are all covered.

Fair questions about robots in pipes

Straight answers. Still not sure? Call 1800 84 33 72 and ask a real person.

Do you need to dig to reach the pipe?

No. The robot works from inside the pipe. There’s no trench, and the work area on the surface stays small.

Can the robot work in a pipe you’ve just relined?

Yes, that’s one of its main jobs. Once the liner has cured, it cuts open each side connection so the flow returns.

What if a builder has washed concrete into our drains?

Call us early. We cut set concrete and slurry into small pieces and remove them, often with no digging at all.

Will cutting out the roots stop them coming back?

Not on its own. Cutting clears the line, but roots grow back through the same gap. So we pair root cutting with a full liner or a point repair that seals the gap they came through.

What if cutting can’t fix the pipe?

A pipe that is fully blocked with a large amount of concrete, or badly broken, may need that section replaced. Our camera survey shows which case it is before we start, and you get the footage to back it up.

Tell us about the line that needs cutting

Leave your details and our team will call you back during office hours to talk through the job. For anything urgent, call now.

  • No trench. The robot works from inside the pipe, so the surface work area stays small.
  • Checked on camera. The operator confirms each connection is fully open.
  • A lasting fix. Root cutting is paired with a liner or point repair.
Call 1800 84 33 72

4.8 from 575+ reviews on ProductReview.com.au

Book a call back

Mon to Fri, 7:30am to 5pm. We never share your details.

We work across Victoria and New South Wales, from Melbourne and Geelong to Sydney, Newcastle and the Illawarra.